I chose 4 motors and 4 ESCs from a single vendor in California. The motors are 2212 class (motor diameter and stator height - 22mm diameter and 12 mm height).
 |
| 4 - 2212 class brushless motors from Ebay |
Features:
- High Torque
- Enduring high-temp above 180℃
- Excellent-efficiency stator design
- High-quality construction with ball bearing and hardened steel shaft
Specification:
- KV: 920
- RPM: 10212
- Diameter: 28.0mm
- Length (w/shaft): 38mm
- Shaft Diameter: ะค3mm
- Stator Dimension (mm)
- Weight: 62g
- Thrust : 670g
- Max Power: 180w
- Input Voltage: 7.4V - 11.1V
- Propeller: GP10*4.5 / APC 9X6 SF / APC 10X4.7
- 4 x MT2212 Motors (2CW+2CCW)
- 100% Brand New
The ESCs came from the same vendor and are pretty generic looking.
They have the following specs:
Features:
- Based on Simon K firmware, further optimized to the perfect drive performance.
- Highest efficiency 100% N-FET design.
- Highest accuracy with Crystal Oscillator (Temperature won't affect the PWM operating range like other cheap ESC's).
- No low voltage cutoff, because any cutoff in a multirotor = crash.
- No over temp cutoff, because any cutoff in a multirotor = crash.
- Super high refresh rate, no buffering of the input signal, resulting in more than 490Hz response rate.
- 16KHz motor frequency, giving fastest response of the motor, and quietest operation as well (no 8KHz squeal).
- Super simple, foolproof operation! Nothing to program other than the throttle range.
- Continuous Current: 30A
- Burst current (10S): 40A
- Li-xx Battery (cell): 2-3
- Dimension (L*W*H): 35mm x 23mm x 8mm
- Weight wires Included: 25g
- BEC Output: 3A/5V
- 4 x Simonk-30A ESC
- 100% Brand New
No comments:
Post a Comment